Course Description

Anyone who wants to renew their IPC-A-610 Certified Standards Expert (CSE) Certification must take this two (2) day IPC-A-610 Instructor Certification. To maintain your 24-month certification, you must re-certify before your certification expires. To enhance an individual’s skill and ability to distinguish between acceptable and unacceptable printed boards, IPC-A-610 Certified Standards Expert (CSE) training aims to increase their understanding and proficiency. When a printed board should be accepted or rejected, moreover students provides a review study of the accept/reject criteria for all three classes of electronic assemblies.

A certificate must be renewed every 24 months. IPC-A-610 Certified Standards Expert (CSE) can complete a recertification Training Course within six months before the expiration of the certificate.


After the Course fulfilment, trainees will be subjected to open and closed book written examinations. Prospects for CSE certification must complete three exams:

1) The Enhanced Policy and Procedures Exam,

2) General Knowledge Exam

3) Standard Endorsement Exam.

The General Knowledge Exam consists of 30 multiple-choice questions. It is a closed-book test. The 70 multiple-choice questions on the Standard-Specific exam are open-book. A candidate must finish the exam within two and a half hours.
An IPC-A-610 Certified Standards Expert (CSE) Certification valid for two (2) years is awarded to students who complete this Course. An appropriate recertification course for Certified Standards Expert (CSE) who have previously achieved their Certified Standards Expert (CSE) certification within the last two years is available to students who have previously achieved their CSE certification.

Who this course is for

Anyone who wishes to renew their IPC certificate and is currently designated as a Certified IPC Specialist with a valid certificate.


Module 1 – IPC-A-610G Foreword, Applicable Documents, and Handling

All other sections of the document, applicable documents, and electronic assemblies apply content found in this module, a list of applicable documents, and the processing of electronic assemblies.

  • General Overview
  • Personnel Proficiency
  • Classification
  • Definition of Requirements
  • Terms and Definitions
  • Inspection Methodology
  • Basic material handling, electro-static discharge (ESD) basics and facility guidelines

Module 2 – IPC-A-610G Soldering and High Voltage

The visual inspection criteria for high voltage soldered connections is provided in this knowledge module. Students who also take modules 4, 5, or 6 must take this module.

  • Soldering Acceptability Requirements
  • Soldering Anomalies
  • High voltage soldering criteria

Module 3 – IPC-A-610G Component Damage & PCBs, Cleanliness

Students who will also complete modules 4, 5, and 6 must complete this additional knowledge module if they want to be certain that their assemblies are clean and properly packaged. This module is required for those who will do so. And also must also complete the visual inspection criteria for component damage, PCB damage, and cleanliness of assemblies in this additional knowledge module.

  • Damage to individual components
  • Non-Soldered Contact Areas
  • Laminate Conditions
  • Conductors/Lands
  • Flexible and Rigid-Flex Printed Circuitry
  • Marking
  • Cleanliness requirements
  • Solder Mask Coating
  • Conformal Coating

Module 4 – IPC-A-610G Terminals

Visual inspection criteria are added to this knowledge module to identify terminal and wire connections.

  • attachment of terminals to circuit boards (swaging)
  • Placement and soldering criteria of wires to terminals

Module 5 – IPC-A-610G Through-hole Technology

The visual inspection criteria for through-hole connections are contained in this additional knowledge module.

  • Handling, placement and solder requirements for trough hole components

Module 6 – IPC-A-610G Surface Mount Technology

The visual inspection criteria for Surface Mount connections are contained in this additional knowledge module.

  • Handling, placement and solder requirements for most common surface mount components

Module 7 – IPC-A-610G Hardware

The visual inspection criteria for hardware and hardware connections used on electronic assemblies are contained in this additional knowledge module.

  • Various support materials that are used to install components onto PCBs
  • Installing PCAs into product chassis

Module 8 – IPC-A-610G Solderless Wire Wrap

The visual inspection criteria for solderless wire wrap connections are included in this additional knowledge module.

  • Acceptability of wire to pin connections (Also known as Discrete Wiring)


On-Site training

If you want to reduce the time spent away from the office, traveling, and the cost of sending people to the class, On-Site Training may be for you. But, this might only be cost-effective for several people. We are not limited to just one type of training, at Ectrotec Training we have both on-site and training centers. For more information on student quantity and material discounts, please contact our business support team.

Discounted Offer

If you have at least five people or want to bring in an open enrollment class in your region or country, Please Contact our Business Support Team for a personal discount. And you will surely be receiving some freebies.

Who we are

EctroTech is one of the largest training centres for the electronics industry in Europe, providing technical training and support for the manufacturing industry to quality people with quality that’s unbeatable. Our clients operate across various industries, including telecommunications, saleable electronics, automotive, protection and security, automotive, railroad, aviation and space, oil and gas, medical, life support, and more. With over more than 25+ years of experience in the manufacturing, testing, and quality inspection of various high ticket industries like Military, Medical, Aerospace, Aircraft, and Commercial electronics and more. From inspection services to ESD services, consultancy, training services and more, we have a wide range of products and services.Content-based open courses are not only customisable, but also engaging and informative. Customised training, on the other hand, are specifically designed to meet your learning demands. The recognition of the training is also high, so the effect will be optimal. We provide training materials, knowledge/skill assessments, solder training kits, IPC materials, and more to help your manufacturing operations succeed.